Concrete Self Undercutting Anchors & Concrete Anchoring Technology - Liebig Superplus

This site will be redirected to soon. Please visit this site to find further information about Liebig Superplus

Concrete Undercut Anchors

Concrete undercut anchors are the most powerful whilst as compared to different types of mechanical anchors. Consequently, the mechanical expansion anchors have decrease resistance to excessive load in comparison to the undercut anchors. Therefore, the concrete anchors are preferred in systems such as nuclear power plant life, for the safety of the humans around wherein failure can cause catastrophic outcomes.

In general, it is essential for concrete to withstand the switch of application to the action load to reap its appropriateness. “Concrete capability” A fixing must be extra or much less close to the base material it’s far fixing into. Nevertheless, the split drive concrete anchor impact at the concrete ability to withstand the weight and movement depends on how the mechanical anchor switches the action load.


How Undercut Anchors Work 
As their name suggests, the work of the mechanical expansion anchors is to expand the pre-drilled hole into the concrete. The resistance to the tensile movement occurs due to the friction created by way of the expansion. Therefore, the more the tensile motion, the greater the specified horizontal expansion. The concrete gets high compression/pressure through excessive expansion forces that adversely outcomes the resistance of the action loads from the concrete.

Concrete expansion anchors work in another way. It works by developing a real key into a pre-cut or self-reduce void in the concrete. They either open out into a pre-cut void as in the case of the Liebig Ultraplus, or they devise their very own void and key into that, as inside the case of the Liebig Ultraplus BLS anchor. They do not rely upon expansion and friction and accordingly, they no longer create such high compressive or pressure zones inside the concrete. As an end result, concrete floor anchor can make a whole lot better use of the concretes capacity and for that reason can resist a good deal higher tensile load. Besides the normal tensile motion loads, the superb mechanical interlock and the discount of compressive stress zones inside the concrete make undercut anchors greater and capable of controlling the movement loads which are created in dynamic, seismic, shock and other such high effect software situations.

Installation of Undercut Anchors
The types of undercut used will have a different design of anchors in concrete setups. There is no need for special tools for self-uncut anchor like the Liebig SUPER PLUS BLS. The anchor itself creates the undercut. A void is formed at a predetermined depth inside the concrete when Keys at the bottom of the expansion shield when the BLS Anchor is expanded into a pre-drilled hole. The resistance to tensile action is provided by and those keys when they lock into those voids.

In the heavy duty anchors for concrete, a void at a predetermined intensity is created like within the case of the Liebig Ultraplus using a particular device. The keys are compelled to make it more significant into the pre-cut void after the setup of the spring motion of the Ultraplus anchor. This form of anchor creates resistance to tensile action. for this tool.

liebig superplus features

Uses of Undercut Anchors

The affirmative keying action created when cracked concrete anchors get installed them to perform very well in cracked and non-cracked concrete. Therefore, when a crack is created, or the concrete expands, the positive keying increases their ability to sustain their resistance. Hence, this is the reason why expansion anchors concrete is used in the structures located in earthquake-prone areas or where the consideration is the seismic qualification.

Undercut anchors are designed for high power. The undercut concrete anchor is designed to get rid of the direct lateral stress discovered with conventional anchors and produce its traits in the direction of those of cast-in-region anchors. With the use of the undercutting tool, the conical form of the anchor fits into the conical reduce of the hollow, developing the tensile potential of the bolt without slip or concrete failure.

Further Application Benefits of Undercut Anchors

Formerly, it was mentioned how undercut anchors exchange the tensile motion into the concrete and boom the concretes capacity to withstand the tensile motion, which gives crucial greater load proficiencies. The essential of operation also provides extra advantages together with decreasing compressive / pressure forces within the concrete,where commonly the undercut anchors can be hooked up toward other similar kinds of anchors and used towards the edges of concrete. As an end result, this ends in fee-saving in the standard setup charges for an application from the reduced materials due to the smaller baseplates.